Black Box LPB2910A, User Manual

Page: 248 / 367

Publication date: Sept, 2015
Revision A1
236
3-­‐5.2.2 NAS
3-­‐5.2.2.1 Switch
The section describes how to show the NAS status information of the switch for each port. The status
includes Admin State Port State, Last Source, Last ID, QoS Class, and Port VLAN ID.
Web Interface
To configure a NAS Switch Status Configuration in the web interface:
1. Click Security, Network, NAS, then Port.
2. Check “Auto-­‐refresh”.
3. Click “ Refresh“ to refresh the detailed port statistics.
Figure 3-­‐5.2.2.1: The Network Access Server Switch Status
Parameter description:
 Port:
The switch port number. Click to navigate to detailed NAS statistics for this port.
 Admin State:
The port's current administrative state. Refer to NAS Admin State for a description of possible
values.

Port State:
The current state of the port. Refer to NAS Port State for a description of the individual states.

Last Source:
The source MAC address carried in the most recently received EAPOL frame for EAPOL-­‐based
authentication, and the most recently received frame from a new client for MAC-­‐based
authentication.
 Last ID:
The user name (supplicant identity) carried in the most recently received Response Identity EAPOL
frame for EAPOL-­‐based authentication, and the source MAC address from the most recently
received frame from a new client for MAC-­‐based authentication.
 QoS Class:
QoS Class assigned to the port by the RADIUS server if enabled.