Black Box LPB2910A, User Manual

Page: 263 / 367

Publication date: Sept, 2015
Revision A1
251
Malformed packets include packets with
an invalid length. Bad authenticators or
unknown types are not included as
malformed access responses.
Rx
Bad
Authenticators radiusAcctClientExtBadAuthenti
cators
The number of RADIUS packets
containing invalid authenticators
received from the server.
Rx Unknown Types
radiusAccClientExtUnknownTyp
es
The number of RADIUS packets of
unknown types that were received from
the server on the accounting port.
Rx Packets Dropped
radiusAccClientExtPacketsDropp
ed
The number of RADIUS packets that
were received from the server on the
accounting port and dropped for some
other reason.
Tx Requests radiusAccClientExtRequests
The number of RADIUS packets sent to
the server. This does not include
retransmissions.
Tx Retransmissions
radiusAccClientExtRetransmissio
ns
The number of RADIUS packets
retransmitted to the RADIUS accounting
server.
Tx Pending Requests
radiusAccClientExtPendingRequ
ests
The number of RADIUS packets destined
for the server that have not yet timed
out or received a response. This variable
is incremented when a Request is sent
and decremented due to receipt of a
Response, timeout, or retransmission.
Tx Timeouts radiusAccClientExtTimeouts
The number of accounting timeouts to
the server. After a timeout, the client
may retry to the same server, send to a
different server, or give up. A retry to the
same server is counted as a retransmit as
well as a timeout. A send to a different
server is counted as a Request as well as
a timeout.
Other Info
This section contains information about the state of the server and the latest round-­‐trip time.
Name RFC4670 Name Description
IP Address -­‐
IP address and UDP port for the accounting server in
question.
State -­‐
Shows the state of the server. It takes one of the following
values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP communication is
not yet up and running.
Ready: The server is enabled, IP communication is up and
running, and the RADIUS module is ready to accept
accounting attempts.
Dead (X seconds left): Accounting attempts were made to
this server, but it did not reply within the configured
timeout. The server has temporarily been disabled, but
will get re-­‐enabled when the dead-­‐time expires. The
number of seconds left before this occurs is displayed in
parentheses. This state is only reachable when more than
one server is enabled.
Round-­‐Trip
Time
radiusAccClientExtRoundTripTime
The time interval (measured in milliseconds) between the
most recent Response and the Request that matched it