Black Box LPB2910A, User Manual

Page: 124 / 367

Publication date: Sept, 2015
Revision A1
112

Entry Name
The name used in specifying the address range used for this rule.
Only the existing profile address entries will be chosen in the selected box. This field is not allowed
to be selected as none ("-­‐") while the Rule Settings Table is committed.

Address Range
The corresponding address range of the selected profile entry. This field is not editable and will be
adjusted automatically according to the selected profile entry.

Action
Indicates the learning action upon receiving the Join/Report frame that has the group address
matches the address range of the rule.
Permit: Group address matches the range specified in the rule will be learned.
Deny: Group address matches the range specified in the rule will be dropped.

Log
Indicates the logging preference upon receiving the Join/Report frame that has the group address
matches the address range of the rule.
Enable: Corresponding information of the group address, that matches the range specified in the
rule, will be logged.
Disable: Corresponding information of the group address, that matches the range specified in the
rule, will not be logged.
 Rule Management Buttons
You can manage rules and the corresponding precedence order by using the following buttons:
: Insert a new rule before the current entry of rule.
: Delete the current entry of rule.
: Moves the current entry of rule up in the list.
: Moves the current entry of rule down in the list.

Buttons
Add Last Rule – Click to add a new rule in the end of the specific profile's rule list. Specify the address
entry and configure the new entry. Click “Commit.”
Commit – Click to commit rule changes for the designated profile.
Reset – Click to undo any changes made locally and revert to previously saved values.