Black Box LPB2910A, User Manual

Page: 86 / 367

Publication date: Sept, 2015
Revision A1
74

Rate Limiter ID:
Select which rate limiter to apply on this port. The allowed values are Disabled or the values 1
through 16. The default value is "Disabled".

Port Redirect:
Select which port frames are redirected on. The allowed values are Disabled for a specific port
number and it can't be set when action is permitted. The default value is "Disabled".
 Mirror:
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".

Logging:
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled". Please note that the System Log memory size and logging rate is
limited.

Shutdown:
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".

State:
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the ACL user module.
Disabled: To close ports by changing the volatile port configuration of the ACL user module.
The default value is "Enabled."

Counter:
Counts the number of frames that match this ACE.

Buttons
Apply – Click to save changes.
Reset -­‐ Click to undo any changes made locally and revert to previously saved values.

Upper right icon (Refresh, clear)
Click one of these icons to refresh the ACL Port Configuration or clear it manually.