CHAPTER 7: Operation
41
7.2.2 M
ENU
P
ROMPTS AND
P
ARAMETERS
As previously mentioned, when the Connect Mode Sign-On screen displays, a sequence of menu
prompts follows. In general, the format of these prompts is: ENTER “parameter name” (default value):.
Each prompt allows you to confirm the default value for a specific LinkUp 5294 configuration
parameter, or enter a new value. The number of menu prompts which ultimately display depends on
which of the following parameters (if any) are defined as overridable during Configurator Mode:
• Device type
• Logical Unit Number
• Password protection (at two levels)
• Inactivity Time Limit
• Reconnect Time Limit
• Local Copy Printer LU Number
• Auxiliary Printer LU Number
• Setup parameters for Auxiliary Printer (page length, line density, etc.)
As the LinkUp is shipped from the factory, your initial Connect Mode Sign-On screen will display only
two menu prompts:
Enter Device Type (ADM3A):
Enter LU Number (0):
A sample Connect Mode session where all of the possible configuration parameters have been defined as
overridable is shown in Figure 7-1. Items underlined are those keyed in by a terminal operator.
