manualshive.com logo in svg

Black Box LinkUp 5294, Manual

The Black Box LinkUp 5294 user manual is a comprehensive guide packed with essential instructions to ensure a seamless setup and operation. Download and access this manual for free from manualshive.com, empowering you to make the most of your product's features and capabilities effortlessly.

Share
Download
background image

CHAPTER 7: Operation

65

Table 7-1. Communications Interface, Flow Control, and Ready Signals

COMM.

FLOW CONTROL

FLOW CONTROL

DEVICE

INTERFACE

from CONVERTER

from DEVICE

READY

DCE

NONE/XON/CTS/DSR

NONE/XON

NONE/RTS/DTR

DCE

NONE/XON/CTS/DSR

DTR

NONE/RTS

DCE

NONE/XON/CTS/DSR

RTS/P11

NONE/DTR

DTE

NONE/XON/RTS/DTR

NONE/XON

NONE/CTS/DTR

DTE

NONE/XON/RTS/DTR

CTS

NONE/DSR

DTE

NONE/XON/RTS/DTR

DSR

NONE/CTS

12. Packet Network Access

Valid values are: N (for None), 1, or 2, or 3.

Values 1 and 2 are generic supports for asynchronous data packet networks. If you choose  one (l), the
LinkUp 5294 to generates cursor positioning as it usually does. If you choose two (2), the LinkUp 5294
relies on the network’s terminal node to perform cursor positioning by means of its local echo of escape
sequences, except in the following situations:

• When a screen wrap is required. This occurs when the cursor moves from the bottom to the top of

the screen, or from the right margin to the left margin.

• When fast cursor left and fast cursor right are invoked.

13. Auto Exit Enabled

Valid values are: YES or NO.

When YES is defined here, the LinkUp 5294 moves the cursor to the next System/3X input field after it
reaches the end of the field it is currently in, providing the field has been defined for auto-exit on your
3X host. To disable Auto Exit, specify NO for this parameter.

NOTE

When Parameter 12, Packet Network Access, is defined as N for none, then Parameter
13 cannot be defined as NO.

7.5.8 L

OGICAL

U

NIT

P

ARAMETERS FOR A

D

ISPLAY

The Display Logical Unit Menu is shown below:

1. Associated Sync Port

Valid values are: 0 (for Port 0) or 1 (Port 1).

The value defined here lets the LinkUp 5294 know which physical synchronous port the LU under
configuration is assigned to.  The 32 LUs available on the LinkUp 5294 may be assigned in whatever way
your application requires. For example, if you require only one synchronous port, then all the LUs can
be defined to that single port; if you require two synchronous ports to emulate two remote controllers,
you may divide the LUs between the two in any combination you wish.

Summary of Contents for LinkUp 5294

















































































































































































































































Reviews:

No comments

Related manuals for LinkUp 5294

Omega Engineering 430 Instruction Sheet preview
430
Brand: Omega Engineering Pages: 3
H3C S9500E Series Connecting Manual preview
S9500E Series
Brand: H3C Pages: 13
H3C S9500E Series Security Configuration Manual preview
S9500E Series
Brand: H3C Pages: 207
H3C S3100-52P Operation Manual preview
S3100-52P
Brand: H3C Pages: 62
hager TS 204 User Instruction preview
TS 204
Brand: hager Pages: 2
Mach Power NW-SP4-001 Installation Manual preview
NW-SP4-001
Brand: Mach Power Pages: 12
Raritan SwitchMan USB-Combo SW2 Brochure preview
SwitchMan USB-Combo SW2
Brand: Raritan Pages: 2
Racal Instruments 1260-X121 User Manual preview
1260-X121
Brand: Racal Instruments Pages: 33
Booma-RC Hidden Ignition Switch Manual preview
Hidden Ignition Switch
Brand: Booma-RC Pages: 16
Vertiv XTE PTS Series Description And Installation Manual preview
XTE PTS Series
Brand: Vertiv Pages: 24
UniFi USW-24-POE Quick Start Manual preview
USW-24-POE
Brand: UniFi Pages: 13
Uniclass UKV-048OSD User Manual preview
UKV-048OSD
Brand: Uniclass Pages: 33
Zennio ZVI-TMDP4 User Manual preview
ZVI-TMDP4
Brand: Zennio Pages: 61
Eaton NetDirector B064-016-02-IPH Installation Instructions Manual preview
NetDirector B064-016-02-IPH
Brand: Eaton Pages: 12
Eaton DILMP Series Instruction Leaflet preview
DILMP Series
Brand: Eaton Pages: 3
3onedata TNS5800D Quick Installation Manual preview
TNS5800D
Brand: 3onedata Pages: 5
Leaf LTHDMI88 Manual preview
LTHDMI88
Brand: Leaf Pages: 16
Apex Digital Viewpoint 64 Installer/User Manual preview
Viewpoint 64
Brand: Apex Digital Pages: 38

Brands by name

Popular brands

Load more brands