BIOS AP DVM06U3, User Manual

Page: 43 / 76

－
42
－
2.7 Setup Mode (Array Parameters Setting)
A power recycle of the storage is MUST to get into Setup mode. It is to avoid critical parameters changed
by misoperation causing possible data crash. Under Setup mode, you can change all kinds of parameters
of the storage unit.
Power on the storage while holding both MODE and SELECT buttons (about 3 seconds) to Setup Mode.
( LCD Display: ARRAY PARAMETERS SETTING )
Launch the web browser with preset IP Address to connect to the management GUI.
“Setup Mode” is shown on upper left corner under company logo to indicate the state of Setup mode.
＜
Critical Parameters
＞
Click on Critical Parameters on main menu to enter Critical Parameters page.