OPERATIONS FROM TOUCH KEYPAD
The
M-Touch
keypad with its ample display enables
graphic presentation of system information. Then the
display is touch-sensitive so is easy and intuitive to
interact with.
In standby the keypad can display information shown in
Figure 1 and described below.
+
Information shown by the keypad in standby de-
pends on operations programmed by the installer
(option
EN50131
enabled or disabled): ask your in-
staller for more information.
Ï
Keypads connected to the Absoluta 630 control
panel, show all the information on the system sta-
tus, when they are in standby status.
1) Status Bar
This area can show the following mes-
sages (with decreasing priority):
Ø
System in Alarm
, above a red bar, in an alarm;
Ø
Auto-arm in
, above an orange bar, if the system is
about to be armed by the time scheduler;
Ø
Labels of open zones, above a grey bar, of zones
with the option
Active on Keypads
enabled (ask the
installer for more information).
2) Activation and Deactivation of Outputs and Actions
Tap this icon to view the outputs and actions that you
can activate and deactivate without you need to login
the keypad: for instructions on how to activate and de-
activate outputs and actions, see "Scenarios" on
page 29. Tap this icon again to close the outputs and
actions window.
3) Temperature display
This area can show the fol-
lowing icons:
Ø
: tap this icon to view the temperature: for more in-
formation, read “Temperature display” on page 10.
Ø
: tap this icon to view the time and date.
4) Signals Icon
This area can show the following
icons, if the
EN50131
option is disabled (with decreas-
ing priority):
Ø
fixed, in an alarm;
Ø
fixed, with tampering or fault;
Ø
blinking, with an alarm memorised;
Ø
blinking, with tampering or a fault memorised;
Ø
fixed, with zones bypassed.
5) SMS not read
This icon is displayed when there
are unread SMSs: the number above the icon indicates
the number of messages not read. Read “GSM/IP > Re-
ceived SMS” for more information.
6) Time and Date, or Temperature
This
area
dis-
plays the current time and date (for more information,
see “Date and Time” on page 23) or the temperature
(for more information, see "Temperature display" on
page 10).
7) Stop Alarms and Service
This area can display
the following icons:
Ø
The
icon, if the
EN50131
option is disabled, when
you have disabled the visual and audio (sirens) sig-
nalling devices using the
Stop Alarms
option: to
re-enable the signalling devices, read "Alarm Reset" on
page 22.
Ø
The
icon when the control panel is in service sta-
tus.
!
When the control panel is in service status, it is
unable to report alarm conditions and other
events that may occur.
To restore normal control panel operation, contact the
installer.
8) Graphic maps
Tap this icon to view graphic maps:
for more information, refer to the
user manual on the Bentel Security
website.
Absoluta Plus and Absoluta 630 OPERATIONS FROM TOUCH KEYPAD
9
Figure 1
The M-Touch keypad is on standby (
EN50131
disabled).
