Ø
Blocking Condition
: a condition that prevents the
arming of the Partitions (see “Arming Blocking Con-
ditions” on page 75).
Ø
...
: indicates that there are other Blocking Conditions
that cannot be displayed as the SMS is too long.
+
The SMS sent in reply may be delayed if there are
other calls in the queue or may be lost if the queue
is full or there are problems with the GSM network.
Credit Check
Ï
The Absoluta 630 control panel does not support
this function.
You can check on the credit remaining for the SIM in the
control panel by sending the following SMS to the con-
trol panel’s GSM number:
#ABS#C#<PIN>#<Text>
Ø
PIN
: a User PIN enabled to manage the control panel
by SMS.
Ø
Text
: additional text that can be used to assign a de-
scription to the command message and is ignored by
the control panel.
+
The angle brackets () should NOT be included in
the message.
For example, lets suppose that your PIN is 1234; the
SMS message will be:
#ABS#C#1234#
The control panel will forward the message received
from the mobile telephone operator to the telephone
number from which the request was made.
+
The SMS sent in reply may be delayed if there are
other calls in the queue or may be lost if the queue
is full or there are problems with the GSM network.
+
If programmed to do so by the installer, the credit
message will be forwarded periodically to the
first
number
in the Phonebook.
+
You can check the credit balance also from a key-
pad: for more information, see “SMS Credit Bal-
ance” on page 32 and “Module Status (3.3)” on
page 53.
Disabling a PIN
You can disable your PIN by sending the following SMS
to the control panel’s GSM number:
#ABS#BLOCK#<PIN>#<Text>
Ø
PIN
: a User PIN enabled to manage the control panel
by SMS.
Ø
Text
: additional text that can be used to assign a de-
scription to the command message and is ignored by
the control panel.
+
The angle brackets () should NOT be included in
the message.
For example, lets suppose that your PIN is 1234; the
SMS message will be:
#ABS#BLOCK#1234#
+
You can enable the PIN from a keypad: for more in-
formation, see “PIN” on page 19 and “PIN Pro-
gramming (2.5)” on page 49.
GSM Module IMEI Request
You can found out the IMEI by sending the following
SMS to the GSM number of the Control Panel:
#ABS#IMEI#<PIN>#<Text>
Ø
PIN
: a User PIN enabled to manage the control panel
via SMS.
Ø
Text
: additional text that can be used to assign a de-
scription to the command message and is ignored by
the Control Panel.
+
The angle brackets () should NOT be included in
the message.
For example, lets suppose that your PIN is 1234; the
SMS message will be:
#ABS#IMEI#1234#
If the operation is successful, the Control Panel will re-
spond with the following SMS:
#ABS#IMEI#<IMEI>#
Ø
IMEI
: is the IMEI number of the GSM Module of the
Control Panel.
Absoluta Plus and Absoluta 630
SMS OPERATIONS
73
