n
Failed to access
The following message appears if an invalid PIN is en-
tered:
+
The keypad blocks for 90 seconds if 10 (3 for the
Grade 3 panels) consecutive invalid PIN are en-
tered.
Arming/Disarming Partitions
When a Partition is armed, any violation of one of its
Zones causes an alarm.
When a Partition is disarmed, its zones can be violated
without causing any alarms.
+
The 24h Zones cause an alarm independent of the
status of Partitions they belong to; they are gener-
ally used to detect security system device tamper-
ing and as fire detectors.
Operations described in this paragraph arm/disarm ALL
Partitions common to Keypad and PIN used, as pro-
grammed by the installer (ask the installer for more in-
formation).
Single Partitions can also be armed/disarmed singly as
described in “Info > Partition Status”.
To arm/disarm Partitions, follow the instructions below.
Enter the Home Screen as described in “Entering the
Home Screen”.
The keypad displays the
Home Screen
described below.
1) Arming Mode
Displays Arming Modes available:
Ø
Global
, arms all Partitions common to Keypad and
PIN used;
Ø
STAY type A
(B/C/D), arms/disarms the Partitions
common to keypad and PIN used as programmed by
the installer.
+
The
Global
option is NOT displayed if the installer
has not programmed at least one stay arming
(Type A, B,C or D).
+
Labels of Stay Arming Modes can vary based on
installer programming.
+
Any arming mode labels that exceed the space avail-
able scroll automatically to display the excess part:
read “Keypad > Scrolling Test” for more information.
2)
Label of Arming Mode selected.
3)
Description of Arming Mode selected.
+
Arming Mode descriptions are programmed by the
installer.
4) Current Arming Status
The coloured box shows
current Partition status:
Ø
GREEN with the label
Disarmed
, if
ALL Keypad Partitions are DISARMED;
Ø
RED with the label
Armed Global
, if
ALL Keypad Partitions are ARMED;
Ø
RED with the label
Armed
if AT LEAST
ONE Keypad Partition is ARMED.
5) Arming/disarming key
The grey key arms the Parti-
tions as selected or disarms them:
Ø
GREY with the label
Arm Global
,
ARMS ALL the Partitions of the Keypad and PIN
used;
Ø
GREY with the label
Arm STAY type
A
, ARMS/DISARMS the Partitions of the Keypad and
PIN used in the programmed mode;
+
The label
Arm STAY Type A
Arming depends on
the Arming Mode selected and can be modified by
the installer.
Ø
GREY
with
the
label
Disarm
,
DISARMS ALL the Partitions of the Keypad and PIN
used.
Here below you will find some possible combinations of
the box displaying the current status of Partitions and
the Arming Key:
Absoluta Plus and Absoluta 630 OPERATIONS FROM TOUCH KEYPAD
13
