4.
Press:
Ø
to cancel all numbers entered
Ø
again to exit the Login Screen and go back to
step 2
Ø
to confirm the PIN entered
The keypad displays the
Home Screen
described be-
low.
1) Signals Icon
This icon signals alarms, tampering,
failures or bypassed zones, in progress or memorised
(it changes based on whether the signal is in progress
or memory): touch this icon to display signals as de-
scribed in “Viewing Signals”.
2) Unread SMS Icon
This icon signals the presence of
SMSs that have not been read; the number to the top
right indicates the number of SMSs to be read: touch
this icon to read them (only Master and Normal Users)
as described in “Received SMS”.
3) Event Transmission Icon
This icon signals that
the control panel is transmitting the events (Alarm,
Tamper, Fault or Generic) through its communication
channels (voice calls, SMS, transmissions to the Cen-
tral Stations): touch this icon to cancel the transmission
in progress and those queuing as described in “Alarm
Status > Clear the transmission of events”.
4) Status Bar
This zone can show the following mes-
sages (with decreasing priority):
Ø
System in Alarm
, above a red bar, in an alarm (read
“Alarm Status” for more information);
Ø
Auto-arm in
, above an orange bar, if the system is
about to be armed by the time scheduler (read
“Auto-arming” for more information).
5) Stop Alarms and Service
This area can display the
following icons:
Ø
The
icon when you have disabled the visual and
audio (sirens) signalling devices using the option
Stop Alarms
: to re-enable the signalling devices, see
“Alarm Reset” on page 22.
Ø
The
icon when the control panel is in service sta-
tus.
!
When the control panel is in service status, it is
unable to report alarm conditions and other
events that may occur.
To restore normal control panel operation, contact the
installer.
6) Graphic maps
Tap this icon to view graphic maps:
for more information, refer to the
user manual, on the Bentel Security
website.
7) Arming/Disarming Keys
These
keys
are
to
arm/disarm Partitions: read “Arming/Disarming Parti-
tions” for more information.
+
The Patrol User can ONLY Away Arming and
Disarming the system, therefore these keys are
NOT available to the Patrol User.
8) Auto-arming
This icon indicates that auto-arming is
enabled: see “System > Auto-arming” for more information.
Press
display/hide the Menu Bar (read “Menu Bar”
for more information):
Press
Exit
to quit the Home Screen or any other keypad
screen, and go back to step 2.
+
The keypad quits automatically from the Home
Screen (from all other screens) after 30 (180) sec-
onds if no key is pressed.
+
Operations possible and information visible de-
pend on the type of PIN used to log in: Master, Nor-
mal or Limited or Patrol.
+
Operations related to Partitions and Zones will
ONLY be effective on Partitions and Zones of Parti-
tions common to the PIN and Keypad used.
+
Each PIN and Keypad can ONLY display the infor-
mation in Partitions and Zones belonging to Parti-
tions common to the PIN and Keypad used.
12
Expandable Hybrid Control Panels
