Alarm Status
The Alarm Status is signalled by means set by the in-
staller:
Ø
visible and/or audible devices (sirens);
Ø
voice calls and/or SMS sent to a programmed series
of numbers;
Ø
transmission of events to central stations.
The Keypad signals the Alarm Status with the message
System in Alarm
above a red bar and the icon
.
If option
EN50131
is disabled the Alarm Status is also
visible from the Standby Status:
Otherwise, if the
EN50131
option is enabled, the alarm
status is only visible in the home screen:
Ï
Keypads connected to the Absoluta 630 control
panel, show the alarm status when they are on
standby status.
Disarm partitions as described in “Arming/Disarming
Partitions” to end the alarm status.
+
The control panel carries on to transmit pro-
grammed events (voice calls, SMS and transmis-
sion of events to the Central Stations) even after
the partitions have been disarmed: read the follow-
ing paragraph to cancel the transmission of events.
See “Menu (User) > Stop Alarms” if the disarming of the
zones does not block the visual/audio (siren) signalling
devices.
n
Clear call queue
1.
Enter the Home Screen as described in “Entering
the Home Screen”:
2.
Press
to cancel the transmissions in progress
and any more queuing:
3.
Press
Yes
to confirm.
16
Expandable Hybrid Control Panels