Scenarios
This option allows you to activate/deactivate Control
Panel
Reserved Outputs
and actions associated with
Remote Command
events.
+
Remote Command events are the same as those
that can be controlled via SMS (read “SMS
OPERATIONS > Events Controlled by SMS”) and
through an i-Phone or an Android smartphone with
the
ABSOLUTA
App.
Ï
The Absoluta 630 control panel does not support
Remote Command events.
Based on Control Panel programming and installation
Reserved Outputs and Remote Command events can
be used to apply domotic features (turning irrigation,
lights, heating etc. on/off). Ask your installer for more
information.
Press
Outputs
to activate/deactivate Reserved Out-
puts or
Actions
to switch the Remote Command
events.
Outputs
The display’s central part lists the Reserved
Outputs and their status.
Press
or
to scroll the list, then press
On
to acti-
vate the output or
Off
to deactivate it.
Actions
The display’s central part lists the Actions.
+
The status of Actions cannot be known a priori.
Press
or
to scroll the list, then press
On
to acti-
vate the action or
Off
to deactivate it
1
.
Info
Press:
Ø
Partition Status
, to view and change Partition sta-
tus;
Ø
Zone Status
, to view zone status and to bypass/in-
clude zones;
Ø
Event Buffer
, to view event records.
Ø
Installer
, to display the installer contact details;
Ø
Bentel Security
, to display the information about
Bentel Security.
Read the relevant section for more information.
n
Partition Status
This option allows you to view and change partition sta-
tus.
Absoluta Plus and Absoluta 630 OPERATIONS FROM TOUCH KEYPAD
29
1
The OFF button is not available if ONLY Monostable
Outputs are associated to the actions as this type of
output is deactivated by itself after the programmed
time has elapsed.
If Monostable and Bistable outputs are associated to
the action, the OFF button deactivates the Bistable
outputs ONLY while the Monostable outputs are
deactivated after the programmed time has elapsed
(ask your installer for more information).
