7.
Read “Display SMS (3.4)” for the instructions on
how read the SMS messages.
n
Display SMS (3.4)
This option allows you to read the SMS received by the
GSM Module.
+
The option
Display SMS
CANNOT be used when
the communicator is active and until it receives a
response to a request for credit balance.
+
The GSM Module can memorise 32 messages. If a
new message arrives when the GSM Module already
contains 32 messages in its memory the oldest mes-
sage is deleted to make room for the new message.
+
The control panel does NOT save SMS activating
or deactivating events (#ABS#E#), disabling the
PIN (#ABS#BLOCK#), requesting a check on the
credit remaining (#ABS#C#), for the Partition Sta-
tus request (#ABS#A#), for arming/disarming the
Partitions (#ABS#A# or #ABS#AF# ).
1.
Press
A
or
B
to show
Display SMS
.
2.
Press
ENTER
to select the option.
SMS 01/01* From
404
The display shows:
Ø
SMS x/n
, where
x
is the message number dis-
played and
n
is the number of messages received,
Ø
an asterisk (
*
) if the message has not been read
and, on the lower line,
Ø
the number that sent the message
+
If the number is memorised in the control panel
phone book the number’s label is shown.
3.
Press
A
or
B
to scroll messages then press
ENTER
to view message reception date and time:
SMS 01/01* Time
Mar/09/13
22:55
4.
Press
ENTER
to view message text: the message
starts scrolling automatically on the display’s lower line:
SMS 01/01* Text
your credit
5.
Press:
Ø
C
to block automatic scrolling and to scroll the mes-
sage manually from right to left;
Ø
D
to scroll the message manually from left to right.
Ø
ON
to start automatic scrolling again from left to right;
6.
Press
OFF
to delete the message:
SMS 01/01* Text
Delete SMS?
7.
Press
ENTER
to confirm and return to step
3
or
ESC
to cancel and return to step
4
.
n
IP Module status (3.5)
This option allows you to view the IP Module’s status.
1.
Press
A
or
B
to view
IP Status
:
USER
3.3
IP Status
2.
Press
ENTER
to select the option:
ABSSRV
192.168.0.115
The display shows the Absoluta
4
Server status on the
upper row :
Ø
ABSSRV
if the Server is enabled and obtainable;
Ø
NO ABSSRV
if the Server is disabled;
Ø
ABSSRV FAULT
if the Server is NOT obtainable.
Shows the Module IP address on the lower row.
IP:
LinkLOST
If there are problems, the display shows on the upper
row IP: and, on the right:
Ø
LinkLOST
if the Module cannot see the LAN net-
work;
Ø
FAULT
if the Control Panel cannot see the Module;
Ø
Wrong FW
if the module firmware is not compatible
with the Control Panel;
Ø
DISABLED
if the module is disable.
3.
Press
OFF
or
ON
respectively to disable or enable
the Module:
IP:
DISABLED
OK!
When the Module is disabled the display shows
IP:
DISABLED
on the upper row and
OK!
on the lower row,
if there are no problems, or the aforementioned prob-
lems.
4.
If the Module is enabled and there are no problems,
press
d
to display its MAC address:
ABSSRV
MAC 123456789012
54
Expandable Hybrid Control Panels
4
The Absoluta Server supports the Absoluta control
panel in access to the Internet services: remote
service, event notification via e-mail and the
ABSOLUTA app, connection of the ABSOLUTA app
to the control panel. Ask your installer for more
information
