Bentel Security Absoluta 630 4.10, User Manual

Page: 61 / 84

KEYFOB OPERATIONS
If your system is equipped with the transceiver, you can
control all the main functions from remote locations us-
ing keyfobs supported by the control panel. This section
describes the operations that the keyfob can perform.
The keyfobs that the Absoluta control panel supports
are two way, and can show the status of the system.
Figure 6 shows the BW-RCH keyfob.
Part Description
A Away Arming button
B Stay Arming button
C Disarming button
D Auxiliary button
E Transmission LED
F Status LED
n
Away Arming
Press the Away Arming button to arm the key-fob’s
partitions (see Table 8 on page 62). If the operation is
successful, the LED above the button turns blue.
n
Stay Arming
Press the Stay Arming button to arm and disarm the
keyfob’s partitions as set for mode A (see Table 8 on
page 62). If the operation is successful, the LED above
the button turns blue.
e
In accordance with the EN 50131-1 standard, the
system does not arm if there is a low battery condi-
tion, when you perform an arming request: the ex-
ternal siren will emit a double squawk. You can
verify the cause that inhibits the arming (low bat-
tery), through an LCD keypad, and force the arm-
ing: the external siren will emit a squawk to signal
the arming.
Ï
Keyfobs enrolled on the Absoluta 630 control panel
arm the partitions even when a low battery condi-
tion is present.
n
Disarming
Press the Disarming button to disarm the keyfob’s
partitions (see Table 8 on page 62). If the operation is
successful, the LED above the button turns blue.
n
Other functions
When you press the Auxiliary
Q
button, or press the
Away Arming and Stay Arming buttons, for two
seconds, depending on the installer setup (see Table 8
on page 62), the keyfob can perform the following
operations.
Ø
No function : no function is assigned to the Auxiliary
Q
button.
Ø
Status : the Auxiliary
Q
button shows the status of
the system on the keyfob, as described in “Status
LED signals” on page 64.
Ø
Mode B arming : the Auxiliary
Q
button arms and
disarms the partitions as set for mode B.
Ø
Super key : the Auxiliary
Q
button triggers the action
programmed by the installer (see the Table 8 on
page 62).
Ø
Mode B arming and super key Event : the Auxil-
iary
Q
button arms and disarms the partition as set
for mode B, and triggers the action programmed by
the installer (see the Table 8 on page 62).
Absoluta Plus and Absoluta 630 KEYFOB OPERATIONS 61
Figure 6 BW-RCH keyfob.