n
Zone Status and Bypass (3.2)
You can view the zone status (standby, alarm, tamper,
short-circuit, bypassed, included) and bypass the
zones as follow.
+
On Grade 2 panels, only Master Users can by-
pass/un-bypass zones.
On Grade 3 panels, only Super Users can by-
pass/un-bypass zones.
1.
Press
A
or
B
to view the
Zone Status
option:
USER
3.2
Zone status
2.
Press
ENTER
to select the option:
Zone status
---
3.
Select the required zone by entering its Identifica-
tion number or scrolling by pressing
A
and
B
: the
display bottom line shows the label of the selected
zone.
Zone status 001
Zone
001
4.
Press
ENTER
: the display bottom line shows the
zone status as follow.
Ø
ST_BY
: the zone is in standby
Ø
ACTIVE
: the zone is active
Ø
OPEN
: the zone is open (tampered)
Ø
SHORT
: the zone is short-circuited
Ø
TAMPER
: the zone is in tamper status
Ø
FAULT
: the zone is faulty
Ø
MASKED
: the wireless detector enrolled on the zone
is masked
Ø
STEADY
: the zone is inactive (Absoluta Plus only)
Ø
ALARM
: the zone in in alarm status
Ø
B. LOW
: battery level of wireless detector enrolled
on the zone is low
Ø
WORKING
: the zone is operative (included)
Ø
BY-PASS
: the zone is bypassed
Ø
IN TEST
: the zone is in test
Zone
001
ST-BY WORKING
+
Hold-up
-type zone does not show the
ACTIVE
sta-
tus when you activate it.
5.
Press:
Ø
OFF
to bypass the zone
Zone
001
Bypassed now
Ø
ON
to include the zone
Zone
001
Included
6.
Press
ESC
to go back to step
3
.
n
GSM Module Status (3.3)
This option allows you to view the GSM Module’s status.
1.
Press
A
or
B
to view
GSM Status
:
USER
3.3
GSM Status
2.
Press
ENTER
to select the option:
GSM OK! ^:***
VODAFONE
The display shows the GSM Module’s status on the top
line, on the left, the GSM signal’s strength on the right,
and the name of the GSM operator on the bottom line,
as described below.
Ø
GSM OK
: the GSM Module is working normally.
Ø
LinkLOST
: Network problem, no SIM
.
Ø
FAULT
: GSM module problem.
Ø
Wrong FW
: firmware not compatible with Control
Panel.
Ø
^
: no asterisks mean no GSM signal; three asterisks
(
***
) mean that the GSM signal’s strength is excel-
lent.
3.
If the GSM Module’s status is OK, press
ENTER
to
view the telephone number of the SIM card placed
in the GSM Module:
Absoluta GSM num
+39328456789
+
If the display shows
No number
, contact the in-
staller.
4.
Press
ENTER
to display the IMEI of the GSM Module:
IMEI:
1234567890123456
5.
Press
ENTER
to check on your remaining credit:
Ï
The Absoluta 630 control panel does not support
this function.
Pay AsYouGo Bal.
Are you sure?
6.
Press
ENTER
to confirm and the control panel will
send an SMS message to check on the credit re-
maining:
Pay AsYouGo Bal.
Please Wait
Absoluta Plus and Absoluta 630
OPERATIONS FROM LCD KEYPAD
53