Settings
Press:
Ø
Alarm Test
, to check that signal devices operate
correctly;
Ø
Date/Time
, to set the date and time of the control
panel;
Ø
System
, to enable/disable the
Privacy
, the
Answer-
ing
, the
Installer
, the
Auto arming
, the
GSM
and
the
IP
;
Ø
Keypad
, to adjust the
Backlighting
, and the keypad
Buzzer
volume, to choose images for the
Digital
Frame
and
Background
, to set the
Clock
operating
mode and the keypad
Language
, to
Clean
the
keypad.
Read the relevant section for more information.
n
Alarm Test
This option allows you to check signal system opera-
tions (alarms).
When this option is selected, Panel Output no. 1 (gener-
ally connected to the external siren) is activated for
about 3 seconds, and Voice Messages and/ or Report-
ing Codes are sent to the Telephone Numbers as-
signed to the
General System Alarm
event (ask your
installer for more information).
The display will show the message << An alarm test will
be performed on the system. Would you like to pro-
ceed?>>.
Press
Yes
to carry out the test or
No
to close the popup
window without doing the test.
n
Date and Time
This option allows you to change date and time on the
Panel clock.
Press
or
to make the desired change, then press
Save
to memorise the change.
+
The date and time will be automatically adjusted if
the installer has enabled this feature.
Absoluta Plus and Absoluta 630 OPERATIONS FROM TOUCH KEYPAD
23
