9) Arm Status
This area can show the following icons,
if the
EN50131
option is disabled:
Ø
if all Keypad Partitions are disarmed
Ø
if at least one Keypad Partition is armed
10) Auto-arming
If option
EN50131
is disabled, this
area displays the
icon when the auto-arming is en-
abled: see “System > Auto arming” for more information.
11) Partition Status, or Outputs and Actions
If op-
tion
EN50131
is disabled, this area displays the parti-
tions status of the keypad, when icon
9
is pressed (
or
):
Ø
Press
or
to scroll through the partitions
Ø
Press icon
9
(
or
) to hide the partition status
When you tap the icon
, this area displays the outputs
and actions that you can activate and deactivate with-
out you need to login the keypad: for instructions on
how to activate and deactivate the outputs and actions,
see "Scenarios" on page 29.
12) User Logged in LED (green)
If on indicates that
the user is logged in to the keypad: read “Entering the
Home Screen” for more information.
13) Armed Partition LED (red)
If the
EN50131
option
is disabled, comes on when at least one keypad Parti-
tion is armed: read “Arming/Disarming Partitions” for
more information.
14) Home Key
Press this key for
less than 3 seconds
to display the
Login Screen
: read “Entering the Home
Screen” for more information.
Keep this key pressed for
at least 3 seconds but less
than 10 seconds
to enter calibrate screen: read
“Screen calibration” for more information.
Keep this key pressed for
at least 10 seconds
to re-
store the keypad.
+
This key blinks when the control panel receives an
SMS: read “Received SMS” for more information.
15) Signals LED (amber)
If option
EN50131
is dis-
abled, it comes on with a signal: read “Viewing Signals”
for more information.
16) Power LED (green)
When on the keypad is pow-
ered.
17) Slot for SD memory card
SD
(Secure
Digital)
Memory Card slot with images to be displayed in digital
picture frame mode (see “ Keypad> Picture Frame”) or
with the desired image for the background (see “Key-
pad > Background Image”).
+
The keypad supports memory cards up to 32 GB,
formatted to FAT16 or FAT32.
18) Control panel in service status
When the con-
trol panel is in service status, the keypad displays a red
frame on all screens.
!
When the control panel is in service status, it is
unable to report alarm conditions and other
events that may occur.
To restore normal control panel operation, contact the
installer.
n
Temperature display
In the standby status, the keypad can display up to two
temperatures, measured by the wireless detectors
equipped with this function: for more information, ask
your installer.
To view the temperature, tap the icon
: the keypad
displays the temperatures as outlined below.
1) and 3)
These are the temperatures measured by
the detectors set up by the installer: the keypad displays
two dashes if the installer has not associated a detector
to the keypad, or if there are problems with the associ-
ated detector.
2) and 4)
These are the labels set by the installer.
To return to display the time and date, tap the icon
.
10
Expandable Hybrid Control Panels
