BeneVision TMS60, Operator'S Manual

Page: 20 / 250

Safety Information Safety
1 - 6 TMS60 Operator’s Manual
1.1.3 Notes
CAUTION
•
At the end of its service life, the equipment and its accessories must be
disposed of in compliance with the guidelines regulating the disposal of
such products. If you have any questions concerning disposal of the
equipment, please contact Mindray.
•
When programming the frequency for a transmitter, the frequencies
allocated to all other transmitters need to be considered to ensure that
no two transmitters are programmed with the same frequency.
NOTE
•
Put the equipment in a location where you can easily view and operate
the equipment.
•
In normal use, the operator shall stand in front of the equipment.
•
The software was developed in compliance with IEC60601-1-4. The pos-
sibility of hazards arising from software errors is minimized.
•
This manual describes all features and options. Your equipment may not
have all of them.
•
Keep this manual in the vicinity of the equipment so that it can be
obtained conveniently when needed.