BeneVision TMS60, Operator'S Manual

Page: 47 / 250

Getting Started Using the Pouch
TMS60 Operator’s Manual 3 - 15
3.8.1 Securing the Pouch for the TD60
To secure the pouch:
1. Place the TD60 into the pouch with the ECG leadwires and the SpO
2
sensor cable,
if used, exiting from the pouch opening, as shown in the following figures.
2. Pinch the snap-fastener to close the pouch.
3. Secure the pouch on the patient with ties around the patient’s shoulder and under
the arm, as shown in the following figure.
CAUTION
•
During showering, do not let water enter or accumulate in the pouch.
Besides, do not perform SpO
2
or NIBP measurement.
•
When the patient is showering, signal quality and leads off detection
may be compromised due to significant movement. Appropriate clinical
precautions must be taken.
For disposable pouch