BeneVision TMS60, Operator'S Manual

Page: 239 / 250

EMC
TMS60 Operator’s Manual B - 5
Guidance and Declaration — Electromagnetic Immunity
The device is intended for use in the specified electromagnetic environment. The customer or the user of the
device should assure that it is used in such an environment as described below.
Immunity test
IEC 60601 Test
level Compliance
level
Electromagnetic environment - guidance
Conducted dis-
turbances
induced by RF
fields
IEC61000-4-6
3 Vrms
150 kHz to 80 MHz
3 Vrms Portable and mobile RF communications
equipment should be used no closer to any
part of the device, including cables, than the
recommended separation distance calcu-
lated from the equation applicable to the fre-
quency of the transmitter. Recommended
separation distance:
d = 150kHz to 80 MHz
d = 80 MHz to 800 MHz
d = 800 MHz to 2.7 GHz
where P is the maximum output power rat-
ing of the transmitter in watts (W) according
to the transmitter manufacturer and d is the
recommended separation distance in meters
(m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site sur-
vey
b
, should be less than the compliance
level in each frequency range
c
.
Interference may occur in the vicinity of
equipment marked with the following sym-
bol:
6 Vrms
in ISM bands and
amateur radio
bandsa between
0,15 MHz and 80
MHz
6 Vrms
Radiated RF EM
fields
IEC61000-4-3
10V/m
80 MHz to 2.7 GHz
10V/m(Only
TD60 and BP10)
Radiated RF EM
fields
IEC61000-4-3
3V/m
80 MHz to 2.7 GHz
3V/m(TMS60 sys-
tem)
Proximity fields
from RF wire-
less communi-
cations
equipment
IEC61000-4-3
27 V/m
380-390 MHz
27 V/m
28 V/m
430-470 MHz, 800-
960 MHz, 1700-
1990 MHz, 2400-
2570 MHz
28 V/m
9 V/m
704-787 MHz, 5100-
5800 MHz
9 V/m
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
P
V




5 . 3
P
E




5 . 3
P
E




7