BeneVision TMS60, Operator'S Manual

Page: 154 / 250

Monitoring at the CMS (Version 03.00 or Above) Monitoring with the TMS60 at the CMS
12 - 36 TMS60 Operator’s Manual
12.3.2 ECG Monitoring
At the CMS, you can view and change the ECG settings in the ECG tab. To enter the ECG
tab, follow this procedure:
1. Select the ECG digital area or waveform area to enter the ECG menu on the
ViewBed screen of the CMS.
2. Select the ECG tab.
12.3.2.1 Setting ECG Alarm Properties
To set ECG alarm properties, follow this procedure:
1. From the ECG tab, select the Alarm section.
2. Set the desired alarm properties.
For the default alarm properties, See “Factory Default Parameter Alarm Settings” on
page 12-3 .
12.3.2.2 Changing ECG Wave Settings
To change ECG waveform related settings, follow this procedure:
1. From the ECG tab, select the Setup section.
2. Set the desired items.
Options or Buttons Description Default Setting
ECG 1 Select the desired ECG lead and set the
corresponding gain for ECG 1. II
ECG 2 (5-lead) I
ECG Gain Configures the size of each ECG waveform. x1
Speed Configures the ECG wave speed. 25 mm/s
Filter Configures the ECG filter in all operating
modes.
■
Monitor : use under normal
measurement conditions.
■
ST use when the ST monitoring is
applied.
Monitor
Notch Filter Configures whether or not to switch on
the notch filter. On
Lead Set 3-Lead, 5-Lead 3-Lead,
* The factory default settings are in bold.