BeneVision TMS60, Operator'S Manual

Page: 52 / 250

Introduction User Configurations
4 - 2 TMS60 Operator’s Manual
4.1 Introduction
This chapter gives you an overview of basic operations related to the TD60, such as con-
figuring the Display Setup, and Audio Volume.
4.2 Configuring the Display
You can configure the display by setting the display layout, display orientation, and
screen brightness.
In the main menu, tap Display Setup to enter the Display Setup menu.
4.2.1 Setting the Default Display Orientation
For details about the display orientation, refer to "Understanding the Screen Display
Orientation" on page 3 - 10 .
1. In the Setup section of the Display Setup menu, tap Default Orientation .
Two buttons display: Portrait and Landscape .
2. Tap a button to set the default orientation.
The selected orientation displays to the right of Default Orientation .
3. Restart the TD60 to apply the setting.
4.2.2 Understanding Portrait Orientation Display Rules
In portrait orientation, both digital and waveform areas take up the entire width of the
screen. Therefore, these parameters will be displayed in the exact order of the
Display
Setup menu, provided the sensor is attached and monitoring data.
4.2.3 Setting the Portrait Display
1. In the Portrait section of the Display Setup menu, tap Rows .
Three options display: 2 , 3 , and 4 .
2. Tap an option to set the row numbers.
The selected option displays to the right of Rows .
3. Tap Portrait Order to enter the Portrait Order menu.
4. Tap a parameter or waveform to select it.
The icon displays to the right of the selected parameter or waveform.