BeneVision TMS60, Operator'S Manual

Page: 96 / 250

SpO2 Measurement Monitoring Pulse Oxygen Saturation (SpO2) (Optional)
9 - 8 TMS60 Operator’s Manual
9.5.2 Configuring the SpO
2
Waveform
1. In the Waveform section of the SpO
2
menu, select the options described in the
following table.
2. Tap to exit the SpO
2
menu.
9.6 SpO
2
Measurement
9.6.1 Identifying SpO
2
Modules
To identify which SpO
2
module you are using, see the company logo on the SpO
2
mod-
ule.
■
Masimo SpO
2
module: white, with a logo of Masimo SET.
■
Nellcor SpO
2
module: grey, with a logo of Nellcor.
9.6.2 Applying the Sensor
1. Select an appropriate sensor according to the module type, patient size, and
weight.
2. Remove colored nail polish from the application site.
3. Apply the sensor to the patient.
4. Connect the sensor to the SpO
2
module and the SpO
2
module to the TD60.
The SpO
2
measurement displays when the TD60 detects that a sensor is con-
nected to the patient.
Options Description Settings*
Speed Selects the SpO
2
pleth waveform speed. 6.25 mm/s, 12.5 mm/s , 25
mm/s
Display SIQ
(Masimo only)
Selects whether or nor to show the Signal Index
Quality (SIQ) in the SpO
2
waveform area. The SIQ
wave indicates the confidence associated with
the saturation measurement and timing of the
pulse. Higher pulse is a better signal.
On , Off
* The factory default settings are in bold.