BeneVision TMS60, Operator'S Manual

Page: 172 / 250

Monitoring at the CMS (Version 03.00 or Above) Monitoring with the TMS60 at the CMS
12 - 54 TMS60 Operator’s Manual
12.3.8 NIBP Monitoring
At the CMS, you can view and change NIBP settings in the NIBP menu.
Select the NIBP digital area on the ViewBed screen of the CMS to enter the NIBP menu.
12.3.8.1 Measurement Limitations
See BP10 NIBP Module Operator’s Manual (P/N: 046-011008-00) for details.
12.3.8.2 Setting NIBP Alarm Properties
To set NIBP alarm properties, follow this procedure:
1. In the NIBP menu, select the Alarm tab.
2. Set the desired alarm properties.
For the default alarm properties, refer to " Factory Default Parameter Alarm Settings" on
page 12 - 3.
12.3.8.3 Changing NIBP Settings
To change NIBP related settings, follow this procedure:
1. In the NIBP menu, select the Setup tab.
2. Set Interval .
12.3.8.4 NIBP Display
The NIBP area displays numerics, as shown below:
1. Parameter label
2. Systolic pressure
3. Diastolic pressure
4. Diastolic pressure high limit
5. Mean pressure high limit
6. Mean pressure low limit
7. Mean pressure obtained after the measurement and cuff pressure obtained during
the measurement
8. Diastolic pressure low limit
9. Systolic pressure low limit
10. Systolic pressure high limit