BeneVision TM80, Operator'S Manual

Page: 193 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 16 - 1
16
Cleaning and Disinfecting
16.1 Introduction
In this chapter we describe how to clean and disinfect the telemetry monitor and its
accessories.
16.2 Safety Information
CAUTION
•
Use only Mindray approved cleaners and disinfectants and methods listed in
this chapter to clean or disinfect your equipment. Warranty does not cover
damage caused by unapproved substances or methods.
•
Mindray makes no claims regarding the efficacy of the listed chemicals or
methods as a means for controlling infection. For the method to control
infection, consult your hospital’s infection control officer or epidemiologist.
•
Non-medical equipment does not provide the same level of protection against
electrical shock. Do not touch the patient and any part of nonmedical
equipment at the same time. Some examples of non-medical equipment are
laser printers and nonmedical computers.
•
The responsible hospital shall carry out all cleaning and disinfection
procedures specified in this chapter.
•
Avoid use of cleaners, materials or chemicals that may damage equipment
surfaces, labels, or cause equipment failures.
•
Never immerse any part of the equipment or accessories in liquids or allow
liquid to enter the interior.
•
Do not pour or spray any liquid directly on the equipment or accessories or
permit fluid to seep into connections or openings.
•
Remove the equipment from use if liquid is spilled on the equipment or
accessories. Contact your service personnel.
•
Check the equipment after cleaning and disinfecting. If there is any sign of
damage, remove it from use.
•
Be sure to disconnect all power cables from the outlets before cleaning the
equipment.