BeneVision TM80, Operator'S Manual

Page: 142 / 240

12 - 6 BeneVision TM80 Telemetry Monitor Operator’s Manual
3. Tap the desired option from the list of options to configure the selected quick key.
4. Repeat steps 2 to 3 to configure other quick keys, if needed.
5. Tap the icon to exit the Quick Keys menu.
12.5.2 Deleting a Quick Key
1. From the quick keys area at the bottom of the Quick Keys menu, press and hold the
desired quick key for two seconds, and then release it.
The quick key background turns to red and displays Delete .
2. Tap Delete .
The quick key is removed from the quick keys area, and the area displays Not Used .
3. Tap the icon to exit the Quick Keys menu.
12.6 Configuring the Network Menu
In the Network menu, you can configure the network and connect the telemetry monitor
to the BeneVision Central Monitoring System via the wireless network.
To configure the Network menu:
1. In the Maintenance menu, tap Network .
2. Select the options described in the following table.
3. Tap the icon to exit the Network menu.
NOTE
Options Action Description
IP Address Setup Select to access the IP Setting
menu. Refer to 12.6.1 Configuring
IP Settings for details.
WLAN Setup Select to access the WLAN Setting
menu. Refer to 12.6.2 Configuring
WLAN Settings for TM80 for
details.
Connect CMS Select to access the Connect CMS menu.
Wireless Setup Select the desired wi-fi band. Refer to 12.6.5 Selecting
WiFi Bands and Channels
for TM80
for details.
EAP Certificate Import desired certificates and
delete certificates from the TM80. Refer to 12.6.6 EAP
Certificate Management for
TM80
for details.