BeneVision TM80, Operator'S Manual

Page: 49 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 4 - 3
4.2.6 Setting the Display Brightness
1. In the Setup section of the Display Setup menu, tap Display Brightness .
The Display Brightness menu displays.
2. Drag the slider to left or right to adjust the brightness.
3. Tap the icon to exit the Display Brightness menu.
4.3 Configuring the Audio Volume
You can independently set the alarm volume, touch screen click volume, and systole beep
volume. The method for setting the three volumes is the same.
To change the volume settings:
1. In the main menu, tap Audio Volume .
2. In the Sounds , Touch Screen Click , or Systole Beep section, drag the slider to the
left or right to decrease or increase the volume.
3. Tap the icon to exit the Audio Volume menu.
The audio volume of alarms ranges from 45 dB to 85 dB.
NOTE
•
The icon indicates that the audio volume is turned off.
•
The minimum sound volume cannot be lower than the minimum alarm volume.
Refer to
12.4 Configuring the Alarms Menu for details.
•
When Minimum Alarm Volume is set to Off and Sounds is turned off, the
icon is displayed on the main screen. It indicates that the alarm sound is turned
off.
•
When your telemetry monitor is connected to the CMS and Sounds is turned off,
Sounds automatically changes to 2 if the CMS is disconnected.