BeneVision TM80, Operator'S Manual

Page: 181 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 15 - 7
SpO
2
SpO
2
High Med* SpO
2
value has
risen above the
high alarm limit or
fallen below the
low alarm limit.
Check the patient’s
condition and
make sure that the
patient category
and alarm limit
settings are
correct.
SpO
2
Low
SpO
2
Desat High The SpO
2
value has
fallen below the
desaturation alarm
limit.
PR High Med* PR value has risen
above the high
alarm limit or fallen
below the low
alarm limit.
PR Low
No Pulse High The pulse signal
was so weak that
the monitor cannot
perform pulse
analysis.
Check the patient’s
condition, SpO
2
sensor, and
measurement site.
NIBP NIBP-S High Med* The NIBP systolic
pressure has risen
above the high
alarm limit or fallen
below the low
alarm limit. Check the patient’s
condition and
check if the alarm
limit settings and
patient category
are correct.
NIBP-S Low
NIBP-M High The NIBP mean
pressure has risen
above the high
alarm limit or fallen
below the low
alarm limit.
NIBP-M Low
NIBP-D High The NIBP diastolic
pressure has risen
above the high
alarm limit or fallen
below the low
alarm limit.
NIBP-D Low
Measurement
Alarm
message
Default
Alarm
priority
Possible cause Solution
* The asterisk (*) means the alarm priority is configurable.
** XX is the ECG lead name
.