BeneVision TM80, Operator'S Manual

Page: 103 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 8 - 5
8.5 Understanding the Resp Display
8.5.1 Resp Digital Area
1. Parameter name
2. Measurement unit
3. Respiration rate (RR)
Options Description Settings*
RR Configures whether to switch on the
Respiration alarm. RR defaults to be switched
on.
After tapping RR , you can configure alarm
limits and alarm priority.
On , Off
Alarm limit range:
0 rpm to 100 rpm; the step
is 1bpm.
The default alarm high
limit is
30 and the default
alarm low limit is 8 .
The alarm high limit should
be at least 2 rpm greater
than the alarm low limit.
Alarm Priority: Low, Med,
High
No Chest Movement The telemetry monitor will trigger the “No
Chest Movement” alarm if the patient has
stopped breathing for longer than the set
apnea time. This option defaults to be
switched on.
When the telemetry monitor is connected to
the Central Monitoring System, switching on
or off this option at the Central Monitoring
System also switches it on or off at the
telemetry monitor, and vice versa.
After tapping this option, you can configure
the alarm priority.
Alarm Priority: High
* The factory default settings are in bold.
1
2
3
4