BeneVision TM80, Operator'S Manual

Page: 31 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 3 - 1
3
Getting Started
WARNING
•
The telemetry monitor shall be installed by Mindray authorized personnel.
•
The software equipment copyright is solely owned by Mindray. No organization
or individual shall resort to altering, copying, or exchanging it or to any other
infringement on it in any form or by any means without due permission.
•
Connect only approved devices to this system. Devices connected to the
equipment must meet the requirements of the applicable IEC standards (e.g.
IEC 60950 safety standards for information technology equipment and IEC
60601-1 safety standards for medical electrical equipment). The system
configuration must meet the requirements of the IEC 60601-1 medical electrical
systems standard. Any personnel who connect devices to the equipment’s
signal input/output port is responsible for providing evidence that the safety
certification of the devices has been performed in accordance to the IEC 60601-
1. If you have any questions, please contact Mindray.
•
If it is not evident from the equipment specifications whether a particular
combination with other devices is hazardous, for example, due to summation of
leakage currents, please consult the manufacturers or else an expert in the
field, to ensure the necessary safety of patients and all devices concerned will
not be impaired by the proposed combination.
•
Contact Mindray to relocate the telemetry monitor.
•
Only Mindray authorized personnel can update the telemetry monitor.