BeneVision TM80, Operator'S Manual

Page: 149 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 12 - 13
1. In the Maintenance menu, tap Defaults .
2. Select the options described in the following table.
3. Tap the icon to exit the Defaults menu.
12.7.1 Transferring a Configuration
You can copy some configurations of one TM80 to anotherTM80 via the MPAN
functionality. The following takes the example of transferring the configurations from
TM80 A to TM80 B.
To transfer the configuration from the telemetry monitor A to telemetry monitor B:
1. In the Maintenance menu of telemetry monitor B, select Defaults
→
Import Device
Settings to enter the settings import mode.
2. In the Maintenance menu of the telemetry monitor A, select Defaults
→
Export
Device Settings to enter the Export Device Settings menu.
The external device (telemetry monitor B in this example) found is listed in the
Export Device Settings menu.
3. Select the desired external device (telemetry monitor B in this example) by tapping
the check box.
4. Tap Export to start exporting the telemetry monitor A’s configurations.
The “Downloading device settings” message will be shortly displayed on the telemetry
monitor B’s screen.
WARNING
•
Do not power off the devices during the download process.
Options Description
Save Departmental
Defaults Allows an authorized user to save the current device settings for
the selected patient category.
Export Device Settings Copies the current settings to the external device.
Import Device Settings Copies the settings from the external device to the telemetry
monitor unit. Refer to
12.7.1 Transferring a Configuration for
details.
Restore Factory Defaults Allows an authorized user to reestablish the original database
power up settings to factory default values.
* The factory default settings are in bold.