BeneVision TM80, Operator'S Manual

Page: 147 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 12 - 11
■
Select
Select CMS
from the
Connect CMS
menu. For details, refer to
12.6.3.2 Connecting the CMS in Unicast Mode .
■
Press the key to enter the main menu
→
in the Central Monitoring System
section, tap Select CMS
→ s
elect the desired CMS.
12.6.5 Selecting WiFi Bands and Channels for TM80
The TM80 supports both 2.4G and 5G WiFi bands.
To select a WiFi band rate and channels, follow this procedure:
1. In the Network menu, tap Wireless Setup .
2. Tap WiFi Band .
3. Select 2.4G or 5G according to the band you are using. 5G is recommended, if avail-
able. Because there is much more wireless interference in the 2.4GHz band.
4. Tap BGN Channels or AN Channels according to the WiFi band selected.
◆
When 2.4G is selected, tap BGN Channels .
◆
When 5G is selected, tap AN Channels .
5. Select the desired channels.
NOTE
•
BGN Channels and AN Channels default to be blank. Channels need to be
selected to improve roaming performance.
12.6.6 EAP Certificate Management for TM80
You can import up to 10 certificates from a USB drive or delete certificates from the TM80.
The TM80 only supports certificates in PEM format. If you need to use certificates in other
formats, you need to convert the certificates before importing them into the TM80. The
openssl tool (version 1.0.2c or later) is recommended for the conversion, and you can get
the setup file on internet conveniently.
12.6.6.1Importing Certificates
Up to 10 certificates can be imported from a USB drive. Only authorized personnel can
import certificates.
Required tools:
■ An empty USB drive (FAT data format and at least 256 MB space)
■
One USB upgrade cable (P/N: 009-005409-00)
■
One computer used to prepare USB drive tools
■
One power module with USB port (output voltage: 5 V, output current not less than 1
A)