BeneVision TM80, Operator'S Manual

Page: 169 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 14 - 3
14.3 Installing the Battery
Refer to 3.4 Installing the Batteries for details.
14.4 Checking the Battery Charge Status
The battery symbol displaying on the top of main screen indicates the battery charge
status. The white part ( ) indicates the remaining battery charge.
NOTE
•
If the “Low Battery” or “Critically Low Battery” alarm occurs, the telemetry
monitor turns off the audio, the screen display the “Local Audio Off” message,
and the screen brightness turns dimmer.
14.5 Removing the Battery
CAUTION
•
Some failure conditions, such as short circuits, can cause a battery to overheat
during using. High temperature can cause burns to the patient or user. If the
device becomes too hot to the touch, remove it from the patient and place aside
until it cools. Then remove the battery from the device, and contact your service
personnel to identify the cause of overheating.
•
Avoid scraping the metal contactor in the battery compartment while removing
the lithium-ion battery pack or AA battery frame. Otherwise, the broken
contact will affect the power supply performance.
•
Remove the battery before transporting the device or if the device is not in use
or is being stored.
NOTE
•
Retain the ECG cable and SpO
2
module with the device while removing the
battery.
1. Lift up the lithium-ion battery pack or AA battery tray at the bottom of the compart-
ment to pop it out.