Bender ATICS-2-63A-DIO, Manual

Page: 79 / 104

Menu mode: Operation and setting
79 ATICS-DIO_D00080_01_M_XXEN/04.2015
Changing the password menu "Settings"
Changing the password menu "TEST"
7.3.4.11 Settings menu 11: Service
The Service menu is reserved for settings made by authorised Bender Service personnel. It is only
accessible to Bender service.
In the Service menu, information about the device status can be called up and settings for specific
operating conditions can be made.
Menu Meaning
Exit Exit settings menu "Password - > Settings"; go up one menu level
1. Password Change the password for the "Settings" menu.
Setting range:
000 … 999
Resolution of setting: 1
2. Status Switch the password protection for the "Settings" menu on or off
on
Password protection is switched on. When an attempt
is made to open one of the setup menus, the entry
screen for entering the password appears automati-
cally:
Once a valid password has been entered, full access will
be granted to all Setup menus (except the "Service"
menu) until menu mode is exited.
off Password protection is switched off.
Menu Meaning
Exit Exit settings menu "Password - > TEST"; go up one menu level
1. Password Change the password for the "TEST" menu.
Setting range:
000 … 999
Resolution of setting: 1
2. Status Switch the password protection for the "TEST" menu on or off
on
Password protection of test menus 2…4 is switched on.
When an attempt is made to open one of these menus,
the entry screen for entering the password appears
automatically:
off Password protection is switched off.
Settings
Enter
password:
0 0 0
TEST
Enter
password:
0 0 0