Bender ATICS-2-63A-DIO, Manual

Page: 51 / 104

Operation
51 ATICS-DIO_D00080_01_M_XXEN/04.2015
6.2.4.2 Test menu 2: Manual changeover
Manual changeover Test of the changeover function. The device changes to the redundant line
and remains in this switch position. The changeover period t(1->2) is dis-
played. The device does not change back to the preferred line until the "RE-
SET" button has been pressed.
Cancel Back to test menu
The date of the test is saved in the test logger to remember the next test once the test interval has
elapsed. The messages from this test are also stored in the history memory.
Risk that the test is accidentally not terminated
If the test menu 3: "Manual changeover" is left after changing over to the redun-
dant line, then the ATICS® remains in this switch position and in "TEST" mode.
- Wait until "Quit: RESET" appears on the display.
- Press the "RESET" button.
- Check whether the ATICS® has changed to the preferred line.
Manual mode aborts manual test
When the transparent cover is opened after changing over to the redundant line,
the ATICS® switches to manual mode. The test will be aborted.
After closing the transparent cover, the ATICS® switches back to the preferred
line.
No entry will be stored in the test logger.
Manual changeover
Cancel
Manual changeover
TEST
t(1->2):
346ms
t(Test): --
Quit: RESET
CAUTION