Bender ATICS-2-63A-DIO, Manual

Page: 61 / 104

Menu mode: Operation and setting
61 ATICS-DIO_D00080_01_M_XXEN/04.2015
7.3 Main menu functions
7.3.1 Menu 1: Alarm/meas. values
Displays current status messages, alarm messages and measured values. The device shows the alarm
status for each menu item:
=
no alarm,
=
alarm.
7.3.1.1 Alarm/meas. values ATICS-2-DIO
Menu item Function Page
Exit Exit menu mode
1. Alarm/meas. values Displays saved status messages, alarm messages and measured values 61
2. Changeover Displays information on the changeover function (number, test) 63
3. History/Logger Displays the history memory, data logger, logger configuration, test
logger and service logger 64
4. Settings Various settings for this device 66
5.Control Run TEST and RESET for this device 80
6. Digital Input Display voltage level of the digital inputs 80
7. Info Display information on device type and firmware versions 80
Menu Meaning
Exit Exit "Alarm/meas. values" menu; go up one menu level
1. Line 1: 228V
Line 1: Measured value mains voltage
2. Line 2: 183V
Line 2: Measured value mains voltage
3. Position:1
Switch position of the changeover switch
4. t(2->1):--
or
4.
SwitchBackLock
Return transfer delay time is enabled, seconds counting backwards
or
switching back interlocking function active
5. Auto mode automatic mode or manual mode
6. Status
Device error (e.g.: no BMS bus master present)
7. I(3):35A
Load current on the TN system or "CT connection" fault
8. Digital input:--
Alarm digital input 1 (see "Settings menu 5: Digital Input" on page 73)
9. Digital Input:--
Alarm digital input 2 (see "Settings menu 5: Digital Input" on page 73)
10. Digital input:--
Alarm digital input 3 (see "Settings menu 5: Digital Input" on page 73)
11. Digital input:--
Alarm digital input 4 (see "Settings menu 5: Digital Input" on page 73)