1 Introduction
S008459 Rev C
Page
11
of 117
11. Finally, insert the tray support rod (6)
between the side legs (Figure 1.24)
Figure 1.24
Note
The tray support rod maybe set in
three different positions (see the
three insertion holes on the inside
of the legs), depending on the
desired angle of media output
tray.
Note
To mount the scanner on the
stand, refer to
1.3.1 Floor Stand
Mounting
in this manual.
1.4 Component
Identification
The following images are used to point out the individual components found on the outside of
the scanner:
Front of Scanner
Figure 1.25: Infinity WF - Front View
Right Side of
Scanner
Left Side of
Scanner
Touch Screen
Stereo Speaker
Stereo Speaker
Transport Cover
Scan Table
USB port for
scanning to a
USB device
Media Output Tray
Scanner
Floor
Stand
