manualshive.com logo in svg

Bell and Howell Infinity WF 48, Operator'S Manual, Page: 80 / 131

Share
Download
Bell and Howell Infinity WF 48 Operator'S Manual Download Page 80

Infinity WF Operator Manual 

 

Page 66 of 

117 

S008459 Rev C 

 

Note 

The controls found in the User Settings screen, with the exception of 

Display

, are the 

same as those found in the User access level.  For an explanation of these controls, 
please refer to 

7.1.1.2 User Settings Section

 in this manual. 

 
 

Display 

The Display screen is viewable by clicking the 

Display

 hyperlink.  From this screen, the 

Poweruser can manipulate the external monitor if one is being used (see 

5.3.4 Viewer Control

 

for more information). 
 

 

Figure 7.12:  Display screen 

 
 
 

Network Configuration Button 

Clicking the 

Network Configuration

 button displays the Network Configuration screen.  From 

this screen, the scanner can be set up to use over a network, and/or the existing network 
connection information can be changed.     
 

 

7.13:  Network Configuration screen 

Summary of Contents for Infinity WF 48




































































































































Reviews:

No comments