Bell and Howell Infinity WF 48 Page 107 Operator'S Manual Download

Page: 107 / 131

8 Web-based Scan Application

S008459 Rev C

Page

of 117

8.1.1.5 Format Tab

Figure 8.10: Format Tab

The Format tab displays the last image scanned. The dimension of the image depends on the
selected format in the Properties tab.

The

Preview (Maximum)

button allows to rescans the complete document area.

The image will be displayed in the preview area of the Format tab

The

Preview

button rescans the document area which is set in the Properties tab.

To get a new preview scan:

1.  Click the Properties tab
2.  Set the new format
3.  Return to the Format tab
4.  Click on the

Preview

button to display the new image

To select a specific area of the image, click with the mouse in the preview area and drag a
rectangle (dragging with the mouse the rectangle starts in the upper left corner and ends in the
lower right corner).

Click the

Zoom in

button to display the selected area of the image in detail

Summary of Contents for Infinity WF 48




































































































































Search results

Summary of Contents for Infinity WF 48

Reviews:

Related manuals for Infinity WF 48

Brands by name

Popular brands

Bell and Howell Infinity WF 48, Operator'S Manual

Search results

Summary of Contents for Infinity WF 48

Reviews:

Related manuals for Infinity WF 48

Brands by name

Popular brands