manualshive.com logo in svg

Bell and Howell Infinity WF 48, Operator'S Manual, Page: 109 / 131

Share
Download
Bell and Howell Infinity WF 48 Operator'S Manual Download Page 109

8 Web-based Scan Application 

S008459 Rev C 

Page 

95

 of 117 

•

  Mail image via SMTP; and 

•

  Save image at SMB network share. 

 
The operator can also close the preview window by clicking the 

Close Window

 button.   

Clicking the Preview symbol - 

 - initiates another preview scan. 

 

 

Figure 8.13:  Preview scan window 

 
 

Save Image to Disk 

The Save Image to Disk option saves the scanned image to a local or network disk drive.  
Clicking the 

Save Image to Disk

 button opens a dialogue window where the operator can either 

request the scanned image be opened using an available software application of their choice 
(

Figure 8.14

), or can be saved to a local or network disk drive (

Figure 8.15

). 

 

   

 

 

 

Figure 8.14:  Open with 

Figure 8.15:  Save to Disk    

 
Changing the file name can be accomplished by clicking on the 

Options

 hyperlink located 

directly above the 

Save image to disk

 button.  The file name is comprised using wild cards.  A 

glossary of the usable wild cards is also available from within the 

Options

 hyperlink. 

 
The metadata that is embedded within the file can also be created/revised by clicking on the 

Metadata

 hyperlink located next to the 

Options

 hyperlink. 

 
 

Note 

The following options accessible from the Preview screen are documented in more 
detail in section 

8.1.3 Bottom Control Panel

. 

 
 

 

Summary of Contents for Infinity WF 48




































































































































Reviews:

No comments