Documentation notes
Version: 2.1
───
7
eXtended Transport System
Staff qualification
These operating instructions are intended for trained control and au-
tomation specialists with knowledge of the applicable and required
standards and directives.
Qualified personnel must have knowledge of drive technology and
electrical equipment as well as knowledge of safe working on electri-
cal systems and machines. This includes knowledge of proper setup
and preparation of the workplace as well as securing the working
environment for other persons.
The documentation published at the time must be used for each in-
stallation and commissioning. The products must be used in compli-
ance with all safety requirements, including all applicable laws, regu-
lations, provisions and standards.
Designation of the target groups
Explanation
Instructed person
This target group has been informed about the possible dangers of improper use.
The assigned scope of duties is clearly defined. Training will be provided for any
tasks outside this scope. Instructions on the required protective measures and de-
vices were provided.
Trained user
This target group meets all the requirements of an instructed person. In addition,
machine or plant-specific training has taken place at the machine builder or manu-
facturer.
Trained specialists
Users who, based on their training, knowledge and experience, are able to assess
the tasks assigned to them and recognize potential hazards, are regarded as
trained specialists. Work experience over several years in a relevant field can also
be considered as part of the technical training.
Qualified electricians
Qualified electricians are able to work on electrical machines or systems based on
their specialist training (university degree, apprenticeship, specialist training). Possi-
ble sources of danger are automatically identified and avoided.
Qualified electricians are specially trained for the working environment and are fa-
miliar with the relevant standards and guidelines. Knowledge of control engineering
and automation is required. The provisions of the accident prevention regulations
must be complied with.
Customer service
Customer service is provided by technicians who have been demonstrably trained
and authorized by Beckhoff or the machine manufacturer to work on the respective
machine or plant.
