Mechanical installation
Version: 2.1
───
55
eXtended Transport System
Guide rails
7.3.1
Straight guide rails
1
2
3
► Always use guide rail 1 with lock 2 on top of the assembled sys-
tem 3
Pre-mounted gate
A gate is available for the mounting of the movers on the guide
rails. The gate must be replaced by a rail on support during the as-
sembly.
Further information is given in the course of the mechanical instal-
lation in the chapter "Mover", [
1
2
3
The screws 1 with the gate 2 and the locating pins 3 are pre-
mounted on the guide rail.
1
2
► Observe the alignment of the guide rail 1
The name plate 2 serves as an orientation aid with regard to the
side of the complete system from which you have to observe the
alignment of the guide rail 1.
1
3
1
2
► Place the guide rail 1 with gate 2 straight down onto the locating
pins 3 of the XTS
