Mechanical installation
46
───
Version: 2.1
eXtended Transport System
Modules
7.2.1
Straight modules
1+2
5+6
3+4
► Insert short locating pins 1 and 2 on the top of the module
► Insert long locating pins 3 and 4 at the sides
► Insert short locating pins 5 and 6 underneath the module
1
► Insert the seal 1
1
2
4
5
3
► Position module 1 with the locating pins 2 in the slots in the ma-
chine bed 5
► Make sure that the cables 3 are positioned in the cut-outs in the
machine bed 5
► Screw the screw and washer 4 hand tight into the center of the
module 1
► Make sure that the contact surface on the washer is free of paint
residues and glue
► Make sure that the module 1 is slightly movable in the slots
1+2
4+5
3
► Insert short locating pins 1 and 2 on the top of the next module
► Insert long locating pin 3 at the side
► Insert short locating pins 4 and 5 underneath the module
