Mechanical installation
Version: 2.1
───
47
eXtended Transport System
Insert the connector card correctly
The connector card only fits into the module in one position.
Insert the connector card in accordance with the description be-
low.
If you insert the connector card into the module the wrong way
around, the contacts on the connector card or in the module may
be damaged.
BECKHOFF
insert this
side first
1
2
3
The lettering 1 "insert this side first" must be inserted into the mod-
ule at the position of the seal. The marking 2 then lines up with the
outer edge of the module. The lettering 3 is for orientation.
1
► Insert the seal 1
1
2
► Insert connector card 1 at the position of the seal 2
1
2
3
► Position module 1 in the slots on the machine bed 3 again and
push it carefully into the module 2
► Make sure that the connector card engages
