Mechanical installation
Version: 2.1
───
59
eXtended Transport System
3
The hole 3 in the center of the curved rail is not used for fixing. You
have the option to use hole 3 for dismantling.
Completion of the assembly
2
2
1
► Tighten the screws 1 in the curved rails
► Tighten the screws 2
► Observe tightening torques:
Components
Tightening torque [Nm]
Screws (M4 x 40)
4
1
► Insert all screws with washers into the remaining curved modules
on the machine bed and screw tight
► Observe tightening torques:
Components
Tightening torque [Nm]
Screws (M5 x 20)
6
1
2
► Insert all screws 1 with threadlocker into the remaining straight
guide rails 2 and screw tight
► Observe tightening torques:
Components
Tightening torque [Nm]
Screws (M4 x 40)
4
