Mechanical installation
52
───
Version: 2.1
eXtended Transport System
Curved modules
Assemble curved modules after straight modules
Make sure that you assemble the curved modules only after hav-
ing assembled the upper and lower straight modules.
You cannot mechanically close the system if you have not fully as-
sembled the straight modules. Straight modules cannot subse-
quently be inserted without removing the curved modules.
1
2
3
► Insert long locating pin 1, seal 2 and connector card 3
1+2
3
► Insert short locating pins 1, 2 and 3
Avoid damaging the cables
Make sure when assembling the curved modules that you insert
and fasten the screws behind the cables on the machine bed.
If you insert the screws in front of the cables, the cables could be
crushed and damaged when fastening.
1
2
3
4
► Push curved module 2 carefully into the straight modules 1 and 3
► Place screw and washer 4 in the center of the module on the ma-
chine bed
