0753V Rev 07/15
#8591852
Gala Ultrasonic Glass Diffuser
Create a spa experience at home. This diffuser releases an ultra-fine water mist that disperses the fragrance of your favorite essential
oil. Simple, one-button control, including the option of cyclic misting as well as an LED light that illuminates the glass cover with a soft
glow, adding to the restful ambiance. Quiet, energy-efficient and safe, with auto shut-off if water level gets too low.
Note:
Be careful while handling the diffuser; the glass cover is fragile and is not attached to the plastic base. When moving the
diffuser, hold the base with one hand and hold the glass cover with the other.
Assembly
Begin by identifying all parts, shown
right.
Step 1.
Plug the AC adaptor connector
into the AC adaptor input in the
bottom of the diffuser. Do not plug
the adaptor into an electrical outlet
yet. Place the diffuser base on a level
surface where you intend to use it.
To prevent damage to the machine,
it’s best not to move it after adding
water.
Step 2.
Fill the water tank with tap
water to the maximum water level
line.
Important:
Do not use distilled
water, which prevents the ultrasonic
ionizer from working properly.
Step 3.
Add 2 to 5 drops of an essential
oil to the water in the water tank.
Step 4.
Place the glass cover onto the
base.
Step 5.
Plug the AC adaptor into an
electrical outlet.
Important:
Do not tip the machine after
filling with water; doing so may
cause water to flow into the internal
parts of the machine, causing
damage. If this occurs, unplug and
empty the water tank. Allow it to
air dry in a well-ventilated place for
three days before refilling.
Over please
