
Safety
Operation Manual
Safety Module for b maXX 5000
BM5-O-SAF-002/3
Document no.: 5.11016.03
19
4
4.4
Operator responsibility
The Safety Module is implemented in an industrial zone. The operator of the Safety
Module is thus subject to the legal work safety obligations.
In addition to the work safety instructions in this operation manual, the safety, accident
prevention and environmental protection regulations applicable to the area of application
of this Safety Module must also be complied with. In doing so, the following applies in
particular:
m
The operator must inform himself of the applicable work safety regulations and
additionally ascertain hazards arise through the special work conditions at the place of
use of the Safety Module in a risk analysis.
The operator must implement these in the form of operation instruction for the total
operation of the machine /application in dependence of the accordant risk assessment.
m
This operation manual must be kept in the immediate vicinity of the Safety Module and
be accessible to persons working on and with the Safety Module at all times.
m
The statements of the operation manual are to be followed completely and absolutely!
m
The Safety Module may only be operated in technically faultless condition and must be
safe for operation.
4.5
Protective category
When installed in the controller, the Safety Module complies with the protective
category IP20.
4.6
Personnel training
WARNING!
Risk of injury if operated by insufficiently qualified persons!
Improper handling can lead to severe personal injury and property damage.
Therefore:
m
Only allow certain activities to be conducted by persons specified in the respective
chapters of this operation manual.
The following qualifications for various areas of operation are specified in the operation
manual:
m
Operating personnel
The drive system may only be operated by persons who have been trained, instructed
and authorized to do so.
Troubleshooting, repairs, cleaning, maintenance and exchange may only be
conducted by trained or instructed personnel. These persons must be familiar with the
operation manual and act according to it.
Commissioning and instruction may only be conducted by qualified personnel.
m
Qualified personnel
Electrical engineers and specialist electricians of the customer or a third party who are
authorized by Baumüller Nürnberg GmbH, trained and certified in the installation and
Summary of Contents for BM5-O-SAF-002
Page 181: ......