Baker Hughes Druck DPI 610 IS, Instruction Manual

Page: 39 / 76

Copyright 2007 Baker Hughes Company.
English–DPI 610/615 IS Instruction Manual | 29
Saving Display or Data Log
6. Memory Operations
6.1 Saving Display or Data Log
In Store Mode three memory operations can be set-up:
None
,
Snapshot
and
Datalog
. Refer to
Section 7.2 for details.
6.2 Store Operations (Screen Snapshots)
To store any display (menu displays excepted), press the STORE key. This saves the current
display to the next available location. Supporting text (10 characters) may be appended. Twenty
memory locations are available on a cyclic buffer. When all 20 have been used, store operations
overwrite existing locations, starting at Location 1.
6.3 Recalling Stored Data (Screen Snapshots)
To recall a previously stored display, press the RECALL key. This recalls the last display saved.
Press the left

or right

cursor keys to recall the previous or next locations respectively. To
exit RECALL , press the EXIT key.
6.4 Data Log Operations
Data Log is a special application of store mode which enables the calibrator to either
automatically log displays at preset time intervals or to manually log a display on operation of the
STORE key. Logged data is written to a user specified file.
To set-up a Data Log file, proceed as follows.
•
Select a task, other than BASIC . If using ADVANCED , set-up the required output
parameters.
• Use SETUP to select Data Log from the Store Mode Menu (See Section 7.2).
TASK : ADVANCED
SNAPSHOT MODE
PRESSURE INT
TASK : ADVANCED
SNAPSHOT MODE
VOLTAGE
ENTER TEXT
PRESSURE INT
TEXT :
SNAPSHOT 19
TASK : ADVANCED
SNAPSHOT 2 TEST19
PRESSURE INT
VOLTAGE
SELECT LOCATION